The Upper roller universal plate bending machine is upper roller universal rolling machine. It is used for rolling the certain plates into the form of drum and arc. The working principle is to curve and roll. The upper roller can move horizontally and vertically so the auxiliary equipments are not needed. It can finish the pre-bending and curvature forming of the two ends. The Upper roller universal plate bending machine are widely used in the industries of petroleum, chemical, cement, shipyard, boiling, aviation, water conservation and keywords electricity transmission tower. Upper roller universal plate rolling machine which is a equipment widely used in petroleum, chemical industry, cement, boiler, shipbuilding, aviation, water conservancy, power transmission towers and other machinery and equipment. Its working principle is rotating bending deformation. For the upper roller can be moved no matter up and down, but also horizontally, so no need additional press or equipment, can realize pretending, bending, as well as correction of the work piece.
The main structure of the Upper roller universal plate rolling machine includes upper roller, lower roller and horizontal movement mechanism, supporting mechanism, main drive mechanism, downturn system, left and right machine frame, chassis and balance mechanism, hydraulic and electrical control systems.
Feature:
1. Rolling products straightness, upper roll set drum-shaped, with side roller regulation, it can rolling
2. High straightness
3. Products from thin to thick plate, ensure the following operations welding smoothly, guarantees welding quality
4. Upper roller universal plate rolling machine the rear bending process, eliminate curved toward the front of the dorsal horn, products roundness
5. Upper roller universal plate bending machine use direct pressure on the end of the materials; it is convenient to control the remaining straight edge
Models Available:
|
Model |
Pressure on upper roller Tons |
Roll capacity |
Diameter of upper roller |
Diameter of lower roller |
Central distance |
Main motor (kw) |
|
|
End (mm) |
Central(mm) |
||||||
|
UNR-20×3000 |
160 |
16 |
20 |
375 |
200 |
330 |
18.5 |
|
UNR-25×2500 |
190 |
20 |
25 |
380 |
220 |
360 |
18.5 |
|
UNR-30×2500 |
230 |
25 |
30 |
410 |
235 |
380 |
22 |
|
UNR-35×3000 |
320 |
30 |
35 |
500 |
260 |
420 |
37 |
|
UNR-45×2500 |
430 |
40 |
45 |
520 |
275 |
460 |
45 |
|
UNR-55×3000 |
610 |
45 |
55 |
620 |
360 |
650 |
55 |
|
UNR-60×4000 |
760 |
50 |
60 |
780 |
380 |
700 |
75 |
|
UNR-65×3000 |
760 |
55 |
65 |
700 |
380 |
700 |
75 |
|
UNR-70×4000 |
1000 |
65 |
70 |
820 |
440 |
820 |
75 |
|
UNR-75×3500 |
1000 |
65 |
75 |
780 |
440 |
820 |
75 |
|
UNR-80×3000 |
1000 |
70 |
80 |
770 |
440 |
820 |
75 |
|
UNR-90×4000 |
1350 |
80 |
90 |
910 |
480 |
920 |
90 |
|
UNR-100×3000 |
1250 |
85 |
100 |
820 |
480 |
920 |
90 |
|
UNR-110×3500 |
1400 |
95 |
110 |
940 |
520 |
1000 |
110 |
|
UNR-120×3000 |
1600 |
100 |
120 |
900 |
520 |
1000 |
110 |
|
UNR-140×3000 |
2200 |
120 |
140 |
960 |
620 |
1200 |
75×2 |
