Curve Down 3 Roller Plate Rolling Machine, three roll for the whole drive roller, power through the planetary gear hydraulic motor to provide torque to roller plate, the work piece and the basically roll no mutual sliding; The three roller bending machine driven by hydraulic cylinders for the arc line down movement. Three rollers used in self- aligning roller bearings. This Curve Down 3 Roller Plate Rolling Machine has the advantage of a feeding without the aid of assistive devices that is able to complete both ends of the pre-deformation sheet and rolling barrel, curved work, can also carry out sheet metal shaping and leveling some of the work, and the remaining straight edge small. The arc three roller bending while the pre-bending and rolling with a dual function, its structure the main base, tip side of the rack, fixed side of the rack, work rolls, drives, overturned, hydraulic systems, electrical control system and other components.
Feature:
The three roller bending machine are all driven rollers, a fixed position on the roller, the roller along the arc and down movements of the sheet metal clamp, when the sheet is pinched by rollers, three rollers to relative rotation, the sheet and work rolls between the friction, so that sheet movement, through the rise and fall under the roller, so that plate bending, roll upward adjustment of the amount of curved or rounded up to the required radius of curvature of the work piece. Roll up and down under the machine two movements driven by the hydraulic cylinder.
Curve Down 3 Roller Plate Rolling Machine Models Available:
|
Model |
Max Thickness |
Diameter of upper roller mm |
Diameter of lower roller mm |
Main motor kW |
|
|
End mm |
Central mm |
||||
|
CDR-10×1500 |
8 |
10 |
205 |
165 |
5.5 |
|
CDR-12×2000 |
10 |
12 |
250 |
185 |
11 |
|
CDR-16×2500 |
12 |
16 |
300 |
220 |
18.5 |
|
CDR-20×3000 |
16 |
20 |
375 |
275 |
18.5 |
|
CDR-25×2500 |
20 |
25 |
380 |
280 |
22 |
|
CDR-30×2500 |
25 |
30 |
410 |
310 |
37 |
|
CDR-35×3000 |
30 |
35 |
500 |
410 |
45 |
|
CDR-40×3500 |
35 |
40 |
550 |
475 |
45 |
|
CDR-45×2500 |
40 |
45 |
520 |
455 |
55 |
|
CDR-50×3500 |
45 |
50 |
630 |
540 |
55 |
|
CDR-55×3000 |
45 |
55 |
620 |
525 |
75 |
