Shaper Machine is mainly used for flat cutting, forming surfaces and grooves on small and medium-sized work pieces in single-piece small batch production.
Feature:
1. The worktable of the shaper milling machine can rotate the left and right angles. The workbench has a fast moving mechanism of lateral and lifting; Shaper machine is used to plan the inclined plane, thereby expanding the scope of use.
2. The feed system of the planer adopts a cam mechanism and has 10 feeds. Shaper milling machine is also very convenient to change the amount of the knife.
3. The shaper is equipped with an overload safety mechanism in the cutter system. When the operation is inadvertent or affected by external force and cutting overload, the cutter slips on its own, and the non-destructive parts ensure the normal operation of the machine.
4. The ram and the bed rails and the gears with speed and the main sliding guide surface are lubricated by the oil pumped by the oil pump.
5. The shaper machine is equipped with a clutch and brake parking mechanism. Therefore, when changing the speed, starting the shaper milling machine and stopping the machine, it is not necessary to cut off the power supply. The brake parking mechanism can make the inertial stroke of the ram when the clutch is disengaged is no more than 10 mm.
Models Available:
|
Model |
|
BC6050 |
BC6066 |
BC6085 |
BC60100 |
|
|
Maximum shaping length |
mm |
500 |
660 |
850 |
1000 |
|
|
Max. range of the horizontal movement of the table |
mm |
600 |
630 |
710 |
710 |
|
|
Max. length of the vertical movement of table |
mm |
300 |
360 |
360 |
360 |
|
|
Max. distance between he ram bottom and table |
mm |
370 |
385 |
400 |
400 |
|
|
Dimension of table top(L*W) |
mm |
650X450 |
660X400 |
800X450 |
800X450 |
|
|
Travel of tool head |
mm |
175 |
120 |
160 |
160 |
|
|
Number of ram strokes per minute |
Times |
12.5-72.5 |
14-80 |
17-100 |
17-100 |
|
|
Swivel of tool head |
° |
+/-60 |
+/-60 |
+/-60 |
+/-60 |
|
|
Maximum size of tool shank(W*T) |
mm |
20X30 |
20X30 |
25X25 |
25X25 |
|
|
Range of table feed |
Horizontal 12 steps |
mm |
0.4-5.0 |
0.4-5.0 |
0.25-3.0 |
0.25-3.0 |
|
vertical 12 steps |
mm |
0.08-1.0 |
0.08-1.0 |
0.12-1.5 |
0.12-1.5 |
|
|
Width of the T-slot for center positioning |
mm |
18 |
18 |
22 |
22 |
|
|
Main motor power |
kW |
3 |
3 |
5 |
5 |
|
