The planer machine is mainly used for planing large work pieces, and it can also process multiple parts at the same time on the workbench. Planer milling machine is the industrial master machine. The table of the planer machine has a linear reciprocating motion through the door frame with the work piece, and the idle stroke speed is greater than the working stroke speed. The beam is generally equipped with two vertical tool holders. The tool holder slide can be rotated by an angle in the vertical plane and can be fed transversely along the beam.
Feature:
1. According to user requirements, special specifications can be customized, and the planer machine configuration can be arbitrarily matched.
2. Worktable transmission mode: 50° helical tooth inclined shaft power input rack drive. The main gearbox is 2 speeds and 4 speeds, and the table speed is steplessly adjustable.
3. Beam locking: The beam is automatically locked by the planer milling machine and interlocked with the beam to achieve interlock control.
4. The feed amount of the vertical planer and the side planer is steplessly adjustable.
5. The basic parts of the planer machine tool are subjected to secondary aging treatment by thermal aging and vibration aging to fully eliminate the internal stress of the casting. The bed, the column and the beam guide are all subjected to super-audio quenching.
Planer Milling Machine Models Available:
|
Model |
B2700 |
B2800 |
B2900 |
|
|
Rail center distance |
mm |
700 |
800 |
900 |
|
Beam guide width |
mm |
500 |
500 |
600 |
|
Max workpiece length |
mm |
3000-12000 |
3000-12000 |
3000-16000 |
|
Max workpiece width |
mm |
1600、1800、2000 |
1600、1800、2000 |
2000、2200 |
|
Max workpiece height |
mm |
1200、1500 |
1200、1500 |
1500 |
|
Workbench width |
mm |
1400、1600 |
1400、1600 |
1600、1800 |
|
Max workpiece weight |
Ton |
12-27 |
14-29 |
16-31 |
|
Worktable rack tension |
N |
51000 |
51000 |
88000 |
|
Tool bar cross section size |
mm |
50×50 |
50×50 |
50×50 |
|
Workbench moving speed |
mm/min |
30-40000 Steplessly adjustable |
||
|
Vertical planer leveling feed |
mm |
0.2-25 Steplessly adjustable |
||
|
Vertical planer vertical feed |
mm |
0.2-20 Steplessly adjustable |
||
|
Side planer feed |
mm |
0.2-6 Steplessly adjustable |
||
|
Standard configuration |
Vertical planer, Vertical milling head, Vertical grinding head, Side planer |
|||
|
Beam lifting speed |
mm/min |
300 |
||
|
Motor Power |
kW |
22-55 |
||
