CKF CNC Lathe is mainly used for the inner and outer cylindrical surfaces of shaft parts or disc parts, the inner and outer conical surfaces of any taper angle, the complex inner and outer curved surfaces, the cylindrical and conical threads, etc., and CKF CNC lathe can be used for grooving, drilling, reaming, reaming and boring. Holes, etc. The machined parts are automatically machined according to the pre-programmed machining program. We process the machining process route, process parameters, tool trajectory, displacement, cutting parameters and auxiliary functions of the parts according to the instruction code and program format specified by the CNC lathe machine tool, and then record the contents of the program list. On the control medium, CKF CNC Lathe is then input into the numerical control device of the CNC lathe machine to direct the machine to machine the parts.
Feature:
|
STANDARD ACCESSORIES |
OPTIONAL ACCESSORIES |
|
1.10 3 jaw chuck |
1.Chuck guard & Leadscrew cover |
|
2.12 4 jaw chuck |
2.Collet attachment |
|
3.Face plate |
3.Taper attachment |
|
4.Morse reduction sleeve M.T.No.7/5 |
4.10 drive plate |
|
5.Centers M.T.No.4,M.T.No.5 |
5.Digital readout device |
|
6. Wrenches |
6.Quick change tool post |
|
7.Steady rest |
|
|
8.Follow rest |
|
|
9.Four way tool post |
|
Models Available:
|
Model |
|
CK6140F |
CK6150F |
CK6166F |
|
Max. swing over bed |
mm |
400 |
500 |
660 |
|
Max. swing over cross slide |
mm |
210 |
290 |
440 |
|
Max. length of workpiece |
mm |
750/1000/1500/2000 |
||
|
Bed width |
mm |
390 |
||
|
Spindle bore |
mm |
52/82 |
||
|
Cone of spindle bore, Morse Taper |
|
NO.6 |
||
|
Spindle speeds, infinitely |
rpm |
3 Steps L:20-200 M:60-650 H:160-1600 |
||
|
Rapid travel speed, X-axis |
mm/min |
6000 |
||
|
Rapid travel speed, Z-axis |
mm/min |
12000 |
||
|
Feed rate of worker table, X-axis |
mm/min |
3-2500 |
||
|
Feed rate of worker table, Z-axis |
mm/min |
6-3000 |
||
|
Min. unit to be set, X-axis |
mm |
0.005/0.001 |
||
|
Min. unit to be set, Z-axis |
mm |
0.010/0.005 |
||
|
Repeat positioning accuracy, X-axis |
mm |
0.012 |
||
|
Repeat positioning accuracy, Z-axis |
mm |
0.016 |
||
|
Repeat positioning accuracy, Turret |
mm |
0.005 |
||
|
No. of tool positions of the turret |
|
4(standard)/ 6(standard) |
||
|
Power of the main drive motor |
KW |
7.5 |
||
