Deep hole drilling and boring machines are used to machine deep holes with a hole diameter ratio (D/L) of 1:6 or more, such as deep holes in parts such as barrels, barrels and machine tool spindles. A deep hole drilling machine that rotates the work piece (or the work piece and the tool rotate simultaneously) is similar to a horizontal lathe.
Feature:
1. Ensure the coaxiality of the drill pipe bracket (deep hole drilling machine with the drill pipe support sleeve), the tool guide sleeve and the headstock spindle and the drill pipe spindle.
2. Stepless adjustment of the feed movement speed.
3. Sufficient pressure, flow and clean cutting fluid system.
4. Deep hole drilling and boring machine with safety control indicating devices, such as spindle load (torque) table, feed speed table, cutting fluid pressure gauge, cutting fluid flow control table, filter controller and cutting fluid temperature monitoring.
5. Tool guiding system. The deep hole drill bit is guided by the tool guide to ensure the exact position of the cutter head before drilling into the work piece, and the guide sleeve abuts against the end face of the work piece.
Models Available:
|
Model |
T2110 |
T2120 |
T2130 |
T2150 |
|
|
Max boring depth |
5000mm |
5000mm |
9000mm |
10000mm |
|
|
Max boring diameter |
100mm |
200mm |
320mm |
500mm |
|
|
Max drilling diameter |
40mm |
80mm |
100mm |
150mm |
|
|
Center height |
250mm |
350mm |
520mm |
550-1150mm |
|
|
Workpiece diameter |
Chuck |
50-180mm |
100-300mm |
200-600mm |
350-1200mm |
|
Center frame |
50-150mm |
100-300mm |
150-600mm |
350-1250mm |
|
|
Spindle speed |
Series |
16 |
12 |
12 |
Stepless |
|
Range |
50-1600 rev/min |
60-1000 rev/min |
1.8-400 rev/min |
0.8-160 rev/min |
|
|
Drill pipe speed |
Stepless |
Stepless |
63-360 rev/min |
30-500 rev/min |
|
|
Roughness |
1.6 |
1.6 |
1.6 |
1.6 |
|
|
Motor power |
15kW |
30kW |
40kW |
75kW |
|
